Image showing a driver feedback sign

Driver feedback signs

Strathcona County uses driver feedback signs to educate drivers regarding their travel speed in our community. Built-in radar is used to determine the speed of an oncoming vehicle, which is then displayed on a lighted board. Only vehicle speeds between a specific minimum and maximum limit are displayed.

  • Urban

    1. Main Blvd & Menlo Crescent – Westbound
    2. Main Blvd & Market Street – Westbound
    3. Manor Drive - Westbound
    4. Granada Blvd – Westbound
    5. Cottonwood Avenue – Northbound
    6. Clarkdale Drive - Southbound
    7. Heritage Drive – Eastbound
    8. Colwill Blvd – Westbound
    9. Regency Drive - Southbound

    Rural

    1. Rosswood Estates – Southbound
    2. Penridge Estates - Northbound

    Permanent signs

    Permanent driver feedback signs run year round at the following locations to help regulate travel speed and promote traffic safety:

    1. Davenport Drive (eastbound)
    2. Darlington Drive (east and westbound)
    3. Galaxy Way (southbound)
    4. Highland Drive (westbound)
    5. Fir Street – Eastbound (One at Cottonwood Ave / One in the Playground Zone)
    6. Fir Street - Westbound
  • In 2010, Strathcona County conducted a pilot project to determine if the signs were effective in reducing traffic speeds in residential areas. Analysis of the data collected during the pilot project found that the signs were effective in decreasing driver speeds for a limited period of time. On average, 72 per cent of motorists corrected their speed once they see the sign.

    In the urban area, signs are placed mid-block on streets in areas of concern. Fortis Alberta has agreed to let the County use their light standards to mount the signs and accompanying solar panels. Transportation and Agriculture Services has acquired five mobile trailer units which will give us more flexibility in placement of the signs and will allow us to expand to the rural areas.

    Since the pilot project showed that positive change in driver behaviour was only demonstrated for a short time, Strathcona County relocates the driver feedback signs approximately every three weeks from May to October.

    Strathcona County places the signs based on a priority score determined by resident complaints, Councillor requests, RCMP requests, historical speed data and the presence of vulnerable road users.

Requests for Driver Feedback signs in your neighbourhood can be made through County Connect.


No parking sign on a sign

Parking changes on Bethel Way

Beginning May 4, 2020, parking will be prohibited on the west side of Bethel Way.

This change is necessary in order to enable safe access for two-way traffic on this transit and emergency services route.

To inquire about this change, please submit a request through County Connect.


Chippewa and Kaska three-way stop

The Chippewa Road and Kaska Road (east) intersection was recently changed to an all-way stop in order to improve traffic flow and safety at the intersection.

The intersection was previously one-way stop controlled, with a stop sign on Kaska Road. Based on concerns raised by businesses and residents who use this intersection, a recent traffic volume and delay study was undertaken and indicated that a three-way stop control at this location is warranted based upon nationally accepted best practices in transportation engineering.

Should you have any questions or concerns about traffic issues, please use the County Connect system.


Flashing beacon pilot project

Pedestrian crossing sign with rapid flash beacon

Rectangular Rapid Flash Beacons (RRFB) are solar powered pedestrian crossings LED lights that display intermittent rapid flashes when activated by a pedestrian.

The County has been installing flashing beacons at various high profile pedestrian crossing locations throughout Sherwood Park as an elevated level of traffic safety. The purpose of installing flashing beacons is to improve pedestrian safety and driver compliance at key marked crosswalks. Traffic safety for vulnerable road users is a priority for Strathcona County.

Transportation Engineering and Operations is monitoring existing locations and will consider new installations based upon an approved set of engineering warrant criteria.


Image of shark's teeth yield lines painted on road by crosswalk

Shark's teeth yield lines

Strathcona County is introducing shark’s teeth yield lines in our community at the crosswalk on Sherwood Drive, adjacent to Salisbury Composite High School. If they improve pedestrian safety, they will be implemented in other locations.

  • Yield lines in advance of crosswalks indicate the safest place to stop when yielding to a pedestrian to maximize pedestrian visibility for other drivers. A line of painted triangles, also referred to as “shark’s teeth” yield markings, are used as the yield line at mid-block crossing locations. The advance stop or yield line is supplemented with a “Yield Here for Pedestrians" sign.

    A multiple-threat collision occurs when pedestrians have to cross more than one lane in each direction. A motor vehicle in one lane stops and provides a visual screen to the motorist in the adjacent lane. The motorist in the adjacent lane continues to move and hits the pedestrian.

    The Transportation Association of Canada recently approved shark’s teeth yield lines as an effective method to reduce the chance of a multiple-threat collision.

Further information:

Transportation Engineering and Operations
Phone: 780-417-7100
Email: transportation@strathcona.ca

Related pages

County Connect

Ask a question, provide feedback or report an issue.

Related topics

Last updated: Monday, June 05, 2023
Page ID: 50161